Automated Sensors
Intelligent Dual Digital Display Fiber Optic Amplifier | High-Speed Dual Digital Display Fiber Optic Amplifier | Intelligent Color Fiber Optic Amplifier | Dual Digital Display Color Fiber Optic Amplifier
Dual digital display fiber optic amplifier
▶ Product Introduction
A groundbreaking concept allows for simultaneous sensitivity setting and display value reset to 100 with a single button press. This makes using multiple sensors in an array more intuitive and convenient. Traditional sensors, when used in arrays, struggle to easily identify anomalies from such cluttered data. Now, with standardized data, anomalies are immediately apparent and quickly adjusted. This innovative sensor automatically detects external contamination that reduces sensitivity and recalibrates back to the initial display. This function eliminates the impact of environmental factors on accuracy, allowing the sensor to maintain consistently high detection precision. The increased sensor power aims to minimize the user's labor costs associated with device maintenance and setup.
Intelligent dual digital display fiber optic amplifier
▶ Product Features
The automatic sensitivity tracking function offers sufficient power, multiple operating modes are available, and the clear digital display provides a concise overview of the operating status. One-button settings ensure ease of use.
▶ Product Specifications
| model | HS-FN18/FN18P |
|---|---|
| type | Standard cable separate output |
| Output mode | NPN/PNP |
| Control output | NPN open collector 24V, maximum output current 100mA or less, residual voltage 1V or less |
| reaction precision | 50us (HIGH SPEED) /250us(FINE) /500us(TURBO) / 1ms(SUPER) /4ms(ULTRA)/16ms(MEGA) |
| APC | Switchable between ON/OFF (initial setting: OFF) |
| Anti-interference quantity | HIGH SPEED: None; FINE: 4; TURBO/SUPER/URTRA/MEGA: 8 (When set to a multiple, the number of anti-interference units also doubles). |
| power supply voltage | DC12-24V+10%(RippleP-P:10%Max) |
| Consume current | Standard mode: 900mW or less (maximum 36mA at 24V, maximum 48mA at 12V); ECOON mode: 800mW or less (maximum 32mA at 24V, maximum 39mA at 12V); ECOFULL mode: 470mW or less (maximum 19mA at 24V, maximum 23mA at 12V) |
| Connection method | Lead-out of wire |
| Protection circuit | Reverse connection and output short circuit protection |
| Insulation resistance | 20MΩ min.(DC250V) |
| Insulation withstand voltage | AC1000V 60Hz for 60 sec |
| Operating and storage temperatures | -15~+55% (do not condense or freeze), storage: -30 to +70℃ |
| Operating humidity | 35~85%RH |
| Ambient light intensity | Incandescent lamps, 20,000 lux or less; fluorescent lamps, 300,000 lux or less. |
| Vibration resistant | Frequency: 10~55Hz, double amplitude 1.5mm, 120 minutes in each direction |
| Impact resistance | Acceleration 500 m/s²: 3 in each direction |
| Luminous body | Red LED |
| Material | ABS , PMMA |
| weight | 80G |
| appendix | Mounting bracket |
High-speed dual digital display fiber optic amplifier
▶ Product Introduction
High sensitivity to meet the requirements of fine detection; sufficient power for multiple operating modes; clear and concise digital display for easy viewing of operating status; simple to use and easy to adjust.
▶ Product Specifications
| model | HN-FV31/FV31P |
|---|---|
| type | Standard cable separate output |
| Output mode | NPN/PNP |
| Control output | NPN open collector 24V, maximum output current 100mA or less, residual voltage 1V or less |
| reaction precision | 33us (HIGH SPEED) / 250us(FINE) / 500us(TURBO) / 1ms(SUPER) / 4ms(ULTRA) / 16ms(MEGA) |
| APC | Switchable between ON/OFF (initial setting: OFF) |
| Anti-interference quantity | HIGH SPEED: None; FINE: 4; TURBO/SUPER/URTRA/MEGA: 8 (When set to a multiple, the number of anti-interference units also doubles). |
| power supply voltage | DC12-24V+10%(RippleP-P:10%Max) |
| Consume current | Standard mode: 710mW or less (maximum 29mA at 24V, maximum 40mA at 12V); ECOON mode: 540mW or less (maximum 22mA at 24V, maximum 28mA at 12V) |
| Display indicator | Operation indicator light: red LED; Dual digital monitor: dual 7-digit display, preset value (4-digit green) and current value (4-digit red) light up together; current value range: 0-64512; additional gain: 0p-999p; Hold function: displays the highest and lowest hold values, with 5 options; bar indicator light displays additional gain (divided into 7 levels, 85%-115%); scale display. |
| Delay function | Disconnect the delay counter, enable the delay counter and single-shot counter, enable disconnect the delay counter and enable the single-shot counter. Counter duration range: 0.1ms to 9999ms, accuracy is 10% of the set value. |
| Connection method | Lead-out of wire |
| Protection circuit | Reverse connection and output short circuit protection |
| Insulation resistance | 20MΩ min.(DC250V) |
| Insulation withstand voltage | AC1000V 60Hz for 60 sec |
| Operating and storage temperatures | -15~+55% (do not condense or freeze), storage: -30 to +70℃ |
| Operating humidity | 35~85%RH |
| Ambient light intensity | Incandescent lamps, 20,000 lux or less; fluorescent lamps, 300,000 lux or less. |
| Vibration resistant | Frequency: 10~55Hz, double amplitude 1.5mm, 120 minutes in each direction |
| Impact resistance | Acceleration 500 m/s²: 3 in each direction |
| Luminous body | Red LED |
| Material | ABS , PMMA |
| weight | 80G |
| appendix | Mounting bracket |
Intelligent color fiber optic amplifier
▶ Product Introduction
Precise identification of subtle color differences; 4-channel design saves space and cost; accurately identifies over 1000 colors; compatible with color-specific probes and all fiber optic probe types; multiple detection modes suitable for various applications; suitable for detecting non-luminous objects.
▶ Product Specifications
| model | HEB-C1 |
|---|---|
| type | NPN/PNP |
| light source | Red LED, Green LED, Blue LED |
| reaction time | 200us(HSP)/1ms(FINE) |
| indicator lights | Output: Red LED; External Synchronization Input: Red LED; Match Rate/Received Light Intensity: LED (Green/Red) |
| Error display | Excessive light intensity, insufficient light intensity, insufficient color difference |
| Calibration method | Single-point/two-point calibration |
| Error value adjustment | Digital display value settings |
| Difference Identification Pattern | C mode / C I mode / I mode |
| Timer function | Timer OFF/ON delay/OFF delay/Single trigger Shot |
| Output selection | Matching output: Connects when the target object's color matches the recorded color; Non-matching output: Connects when the target object's color differs from the recorded color. |
| External Synchronous Input | Response speed: Maximum 500ps |
| External calibration input | Input response time: minimum 20ms |
| Record color selection | Database selection (by external input or keypad operation), no voltage input |
| Control output | NPN (PNP): Maximum 40VDC (100mA), Residual Voltage: Maximum 1.0V |
| Protection circuit | Reverse electrode protection (power supply), overcurrent protection (output), overvoltage protection (output) |
| power supply | 12 to 24VDC ±10%, pulsation (PP): maximum 10% |
| Consume current | Maximum 75mA |
| Ambient light | Incandescent bulbs: maximum 5,000 lux; Daylight bulbs: maximum 10,000 lux |
| Ambient temperature | -10 to 55 ℃ |
| relative humidity | 35% to 85% |
| Vibration resistance | 35% to 85% |
| Blend singleton | 500 m/s², in the X, Y, and Z directions, 3 times in each direction. |
| Shell material | PC |
| Weight (including 2m cable) | Approximately 170g |
Dual digital display color fiber optic amplifier
▶ Product Introduction
Color mode/normal mode switchable; high sensitivity to meet fine detection requirements; sufficient power for multiple working modes; clear and concise digital display for easy viewing of working status; simple to use and easy to adjust.
▶ Product Specifications
| model | HS-C71 |
|---|---|
| type | Standard cable separate output |
| Output mode | NPN/PNP |
| Control output | NPN open collector 24V, maximum output current 100mA or less, residual voltage 1V or less |
| reaction precision | MAPK mode: 50µs; CLOLOR mode: 130µs |
| indicator lights | Operation indicator light: red LED; Dual digital monitor: dual 8-digit display, the set value (4-digit green LED indicator) and the current value (4-digit red LED indicator) are lit together, current value range: 0-9999 |
| power supply voltage | DC12-24V+10%(RippleP-P:10%Max) |
| Consume current | Maximum 300mA |
| Detection method | Light intensity detection (MARK), automatic color matching detection (C), color brightness value detection (C1) |
| Connection method | Lead-out of wire |
| Protection circuit | Reverse connection and output short circuit protection |
| Insulation resistance | 20MΩ min.(DC250V) |
| Insulation withstand voltage | AC1000V 60Hz for 60 sec |
| Operating and storage temperatures | -15~ 55℃ (do not allow condensation or freezing), storage: -30~ 70℃ |
| Operating humidity | 35~85%RH |
| Ambient light intensity | Incandescent lamps, 20,000 lux or less; fluorescent lamps, 300,000 lux or less. |
| Vibration resistant | Frequency: 10~55Hz, double amplitude 1.5mm, 120 minutes in each direction |
| Impact resistance | Acceleration 500 m/s²: 3 in each direction |
| Luminous body | Tricolor LED |
| Material | ABS , PMMA |
| weight | 80G |
| appendix | Mounting bracket |
