Automated Sensors

Single-digit display fiber optic amplifier | Knob-type fiber optic amplifier

Single-digit display fiber optic amplifier

▶ Product Introduction
A groundbreaking concept allows for simultaneous sensitivity setting and display value reset to 100 with a single button press. This makes using multiple sensors in an array more intuitive and convenient. Traditional sensors, when used in arrays, struggle to easily identify anomalies from such cluttered data. Now, with standardized data, anomalies are immediately apparent and quickly adjusted. This innovative sensor automatically detects external contamination that reduces sensitivity and recalibrates back to the initial display. This function eliminates the impact of environmental factors on accuracy, allowing the sensor to maintain consistently high detection precision. The increased sensor power aims to minimize the user's labor costs associated with device maintenance and setup.

HNMER2-GP series PoE cameras

▶ Series Features
400,000 to 20,000,000 pixels, frame rate up to 302fps, supports GEN CAM™ and GigE Vision® Gigabit Ethernet interfaces support Power over Ethernet (PoE) optocoupler-isolated 1-input 1-output I/O, 2-channel programmable GPIO, compact, lightweight, rugged, and highly competitively priced.
▶ Product Specifications
model Resolution (H×V) Frame Rate (FPS) sensor Pixel size primitive depth color
HNMER2-041-302GM/C-P 720 × 540 302 fps 1/2.9" Sony IMX287 Global Shutter CMOS 6.9μm × 6.9μm 8/12bits Black and white/color
HNMER2-160-75GM/C-P 1440 × 1080 75 fps 1/2.9" Sony IMX273 Global Shutter CMOS 3.45μm × 3.45μm 8/12bits Black and white/color
HNMER2-202-60GM/C-P 1600 × 1200 60 fps 1/1.8" Teledyne e2v EV76C570 Global Shutter CMOS 4.5μm ×4.5μm 8/10bits Black and white/color
HNMER2-231-41GM/C-P 1920 × 1200 41 fps 1/1.2" Sony IMX249 Global Shutter CMOS 5.86μm × 5.86μm 8/10bits Black and white/color
HNMER2-302-37GM/C-P 2048 × 1536 37.4 fps 1/1.8" Sony IMX265 Global Shutter CMOS 3.45μm × 3.45μm 8/10bits Black and white/color
HNMER2-503-23GM/C-P 2448 × 2048 23.5 fps 2/3" Sony IMX264 Global Shutter CMOS 3.45μm × 3.45μm 8/10bits Black and white/color
HNMER2-630-18GM/C-P 3088 × 2064 18 fps 1/1.8" Sony IMX178 Global Shutter CMOS 2.4μm × 2.4μm 8/12bits Black and white/color
HNMER2-1220-9GM/C-P 4024 × 3036 9.63 fps 1/1.7" Sony IMX226 Rolling Shutter CMOS 1.85μm × 1.85μm 8/12bits Black and white/color
HNMER2-2000-6GM/C-P 5496 × 3672 5.8 fps 1" Sony IMX183 Rolling Shutter CMOS 2.4μm × 2.4μm 8/12bits Black and white/color

HNME2P-GP PRO series PoE camera

▶ Series Features
400,000 to 20,000,000 pixels, frame rate up to 302fps, supports GEN CAM™ and GigE Vision® Gigabit Ethernet interfaces support Power over Ethernet (PoE) optocoupler-isolated 1-input 1-output I/O, 2-channel programmable GPIO, compact, lightweight, rugged, and highly competitively priced.
▶ Product Specifications
model Resolution (H×V) Frame Rate (FPS) sensor Pixel size primitive depth color
HNME2P-560-21GM/C-P 2600 × 2160 21 fps 1/2'' GMAX2505 Global Shutter CMOS 2.5μm × 2.5μm 8/12bits Black and white/color
HNME2P-900-13GM/C-P 4200 × 2160 13 fps 2/3" GMAX2509 Global Shutter CMOS 2.5μm × 2.5μm 8/12bits Black and white/color
HNME2P-1230-9GM/C-P 4096 × 3000 9 fps 1.1" Sony IMX304 Global Shutter CMOS 3.45μm × 3.45μm 8/12bits Black and white/color
HNME2P-1840-6GM/C-P 4496 × 4096 6.4 fps 1" GMAX2518 Global Shutter CMOS 2.5μm × 2.5μm 8/12bits Black and white/color
HNME2P-2621-4GM/C-P 5120 × 5120 4.5 fps 1.1" GMAX0505 Global Shutter CMOS 2.5μm × 2.5μm 8/12bits Black and white/color

Single-digit display fiber optic amplifier

▶ Product Features
Sufficient power, multiple operating modes, clear and concise digital display for easy monitoring of operating status, user-friendly operation, and high cost-performance ratio.
Download Product Introduction
▶ Product Specifications
model HS-FV11/FV11P
type Standard cable separate output
Output mode NPN/PNP
Control output NPN open collector 24V, maximum output current 100mA or less, residual voltage 1V or less
reaction precision 250 us(FINE) /500us(TURBO) /1ms(SUPER)
Operating mode LIGHT-ON/DARK-ON switch selection
Display indicator Indicator lights: Red LED; Digital LEDs: 7-segment, 4-digit, Red LEDs; Bar LEDs: 1 Orange and 6 Green LEDs
Delay function ON - Delay: 40ms / OFF - Delay: 10ms Timer OFF (Switch Selection)
Detection method HIGH SPEED (no FINE): 4 units; TURBO/SUPER/URTRA/MEGA: 8 units (when set to a multiple, the number of anti-interference units also doubles).
power supply voltage DC12-24V+10%(RippleP-P:10%Max)
Consume current Below 50mA
Connection method Lead-out of wire
Protection circuit Reverse connection and output short circuit protection
Insulation resistance 20MΩ min.(DC250V)
Insulation withstand voltage AC1000V 60Hz for 60 sec
Operating and storage temperatures -15~ 55℃ (do not allow condensation or freezing), storage: -30~ 70℃
Operating humidity 35~85%RH
Ambient light intensity Incandescent lamps, 10,000 lux or less; fluorescent lamps, 20,000 lux or less.
Vibration resistant Frequency: 10~55Hz, double amplitude 1.5mm, 120 minutes in each direction
Impact resistance Acceleration 500 m/s²: 3 in each direction
Luminous body Red LED
Material ABS , PMMA
weight 75G
appendix Mounting bracket
TOP

Knob-type fiber optic amplifier

▶ Product Introduction
It features a simple and easy-to-use single-button design, requires no complicated settings, has sufficient power, provides stable detection, and offers high cost-effectiveness.
Download Product Introduction
▶ Product Specifications
model HS-RN1A/RP1A
type Standard cable separate output
Output mode NPN/PNP
Control output NPN open collector 24V, maximum output current 100mA or less, residual voltage 1V or less
reaction precision Action, reset less than 200us
Operating mode Maximum of 5 units
power supply voltage DC12-24V+10%(RippleP-P:10%Max)
Consume current Power consumption below 960mW, current consumption below 40mA
Delay function Switch mode switching (fixed timer duration: 40ms)
Connection method Lead-out of wire
Protection circuit Reverse connection and output short circuit protection
Insulation resistance 20MΩ min.(DC250V)
Insulation withstand voltage AC1000V 60Hz for 60 sec
Operating and storage temperatures -15~ 55℃ (do not allow condensation or freezing), storage: -30~ 70℃
Operating humidity 35~85%RH
Ambient light intensity Incandescent bulbs, 1000 lux or less; fluorescent bulbs, 2000 lux or less.
Vibration resistant Frequency: 10~55Hz, double amplitude 1.5mm, 120 minutes in each direction
Impact resistance Acceleration 500 m/s²: 3 in each direction
Luminous body Red LED
Material ABS , PMMA
weight 70G
appendix Mounting bracket