Spectral confocal displacement sensor
HD Series Controller | HG Series Controller | HE Series Controller
HD Series Controller
▶ Product Introduction
Up to 8 channels of simultaneous measurement: Synchronous timing error between channels is less than 1ns. New design reduces volume by 50%: The HD series controller features a lightweight, integrated design, significantly reducing its size to meet the requirements of more space-constrained installations. High sampling rate: The HD series controller has a sampling rate of up to 4000Hz. Modular LED light source: Only one controller is needed to support simultaneous measurement of 8 probes, significantly saving costs. High stability: Optimized structural design improves stability and reduces the impact of accuracy errors caused by heat.
▶ Product Features
- Lightweight and small size design
- High-speed sampling frequency
- Stability improved by 5%
▶ Naming Rules
| HD | C | IN | 4 | L50 | M2 |
|---|---|---|---|---|---|
| HD Series: Point Confocal PC Version V2.0 | Probe range: C: full range Y: half range | Interface type: U: USB port G: Gigabit network port | Sampling frequency: 4KHz | Fiber optical transmission: L50: 50μm aperture XL25: high efficiency 25μm aperture XL63: high efficiency 63μm aperture | Number of channels: Blank: 1 channel M2: 2 channels M4: 4 channels M8: 8 channels |
▶ Product specifications
| model | HD Series |
|---|---|
| Sensor lens compatibility | Compatible with all series lenses |
| Number of connectable sensors | 1/2/4/8 optional |
| Motion synchronization | Support external synchronous trigger pulse signal input |
| Ethernet interface | Ethernet (100Mbit/s or 1000Mbit/s network port)/USB optional |
| Synchronize time | Synchronization error time between channels <30μs |
| Output signal high and low level | After setting the tolerance range, the controller can output high and low level signals in time through the IO port according to the measurement results. |
| Sampling frequency | 64000/12800 (spectral lines/second) |
| Output frequency | 4000 data points/second |
| Status value display | Host computer interface |
| light source | LED white light |
| illumination | Incandescent or fluorescent lamp: Maximum 30,000 lux |
| Operating temperature | 4~51℃, (-20~75℃ or wider range can be customized) |
| Storage temperature | -10~75℃, (-20~85℃ or wider can be customized) |
| Operating humidity | 0~90% RH without condensation or icing |
| Recommended usage environment | 4~30℃, 60±20% RH, no condensation, no strong light, no strong vibration |
| Protection level | IP40, when optical fiber is connected or connector is covered (higher can be customized) |
| Temperature drift | About 0.012% FS/℃ (K/H type low temperature bleaching version) |
| Dimensions | 283*103*183mm (controller host) |
| Dimensions | 283*132*204.5mm (including bottom standing angle) |
| weight | Approximately 4 kg |
| power supply | 24V DC, no compressed air required |
| Current | 2A |
| Installation | M3 screw fixation at the bottom |
HG Series Controller
▶ Product Introduction
The modular LED light source uses multiple prism dispersion components, which is more than twice as efficient as other dispersion principles. Its linearity is more than twice as high. With submicron resolution, it can stably measure various materials and uneven surfaces. The sampling frequency is up to 33KHz, and it supports online measurement with intelligent automatic exposure mode. The light path adapts to various surface shapes and colors. High light intensity path provides clearer imaging quality.
▶ Product Features
- Self-created advanced FPGA/CPU architecture
- Ultra-high sampling rate 33000Hz
- Rich interface types
▶ Naming Rules
| HG | C | AND | 7 | L50 | M2 |
|---|---|---|---|---|---|
| HG Series: Embedded High-Speed Type | Probe range: C: full range Y: half range | Interface type: E: Ethernet R: RS485 S: RS422 V: Analog | Sampling frequency: 7:7KHz 15:15KHz 33:33KHz | Fiber optical transmission: L50: 50μm aperture XL25: high efficiency 25μm aperture XL63: high efficiency 63μm aperture | Number of channels: Blank: 1 channel M2: 2 channels |
▶ Product specifications
| model | HG Series |
|---|---|
| Sensor lens compatibility | Compatible with all series lenses |
| Number of connectable sensors | 1/2 optional |
| Trigger method | I/O hard trigger, fixed frequency continuous trigger, encoder trigger |
| Interface Type | Ethernt/IO port/5-axis AB phase encoder |
| Synchronize time | 30μs |
| Output signal | Ethernet-Communication with PC and PLC can choose custom protocol or Modbus protocol, which can realize parameter reading and writing, measurement result acquisition, GPIO control and status acquisition, etc. (optional, RS485/RS422/analog quantity) |
| Sampling frequency | 7KHz/15KHz/33KHz optional |
| Output frequency | 7KHz/15KHz/33KHz optional |
| Status value display | Host computer interface |
| light source | LED white light |
| illumination | Incandescent or fluorescent lamp: Maximum 30,000 lux |
| Operating temperature | 4~51℃ |
| Storage temperature | -10~75℃ |
| Operating humidity | 0~90% RH without condensation or icing |
| Recommended usage environment | 4~30℃, 60±20% RH, no condensation, no strong light, no strong vibration |
| Protection level | IP40, when optical fiber is connected or connector is covered (higher can be customized) |
| Temperature drift | About 0.012% FS/℃ (K/H type low temperature bleaching version) |
| Dimensions | 232*119*143mm (length*width*height) |
| weight | About 2.5kg |
| power supply | 24V±10% DC, no compressed air required |
| Current | 2A |
| Installation | M3 screw fixation at the bottom |
HE Series Controller
▶ Product Introduction
Supports 4 channels and can connect up to 4 lenses for synchronous measurement. Embedded low power consumption, self-developed architecture, adaptable to multiple lenses. Provides rich SDK application functions. Supports height and thickness batch result pre-processing functions, including exception, invalid, filtering, and data end optimization processing.
▶ Product Features
- Embedded low power consumption
- Enrich SDK application functions
- 4 channels, highly integrated hardware
▶ Naming Rules
| HE | C | AND | 05 | L50 | M2 |
|---|---|---|---|---|---|
| HE Series: Embedded Point Confocal Economical | Probe range: C: full range Y: half range | Interface type: E: Ethernet R: RS485 S: RS422 V: Analog | Sampling frequency: 05:450KHz | Fiber optical transmission: L50: 50μm aperture XL25: high efficiency 25μm aperture XL63: high efficiency 63μm aperture | Number of channels: Blank: 1 channel M2: 2 channels M4: 4 channels |
▶ Product specifications
| model | HE Series |
|---|---|
| Sensor lens compatibility | Compatible with all series lenses |
| Number of connectable sensors | Up to 4 channels |
| Trigger method | I/O hard trigger, fixed frequency continuous trigger |
| Interface Type | Ethernt/IO |
| Synchronize time | 30μs |
| Output signal | Ethernet-Communication with PC and PLC can choose custom protocol or Modbus protocol, which can output measurement data and control input and output (optional, RS485/RS422/analog quantity) |
| Sampling frequency | 500Hz |
| Output frequency | 500Hz |
| Status value display | Host computer interface |
| light source | LED white light |
| illumination | Incandescent or fluorescent lamp: Maximum 30,000 lux |
| Operating temperature | 4~51℃, (-20~75℃ or wider range can be customized) |
| Storage temperature | -10~75℃, (-20~85℃ or wider can be customized) |
| Operating humidity | 0~90% RH without condensation or icing |
| Recommended usage environment | 4~30℃, 60±20% RH, no condensation, no strong light, no strong vibration |
| Protection level | IP40, when optical fiber is connected or connector is covered (higher can be customized) |
| Temperature drift | About 0.012% FS/℃ (K/H type low temperature bleaching version) |
| Dimensions | 174*75*104mm (length*width*height) |
| weight | About 700g |
| power supply | 24V DC, no compressed air required |
| Current | 2A |
| Installation | M3 screw fixation at the bottom |
