Light source and light source controller

Analog constant current controller

Analog constant current controllers achieve stepless adjustment of light source brightness through current control. They are simple in structure and easy to operate. They are the most commonly used controllers and are suitable for point light sources, parallel light sources, etc. They are also compatible with trigger functions.
▶ Application range
  • Brightness stepless control
  • Simple structure and good stability
  • With short circuit protection function
  • With external trigger and high and low level switching functions
  • Two installation methods are available: DIN rail clip installation (some models) and screw fixing (remove the foot pad)
▶ Control panel instructions

Adjustment knob: Potentiometer adjusts the brightness of the light source. Trigger interface: Controls the light source on and off through external access to a 12-24V trigger signal. High and low levels: L is constant on mode, giving a trigger signal turns the light source off; H is constant off mode, giving a trigger signal turns the light source on. Light source interface: SM3P female interface, a total of 4 light source outputs, each independently controlled. AC outlet and switch: Input voltage AC100-240V, 50/60Hz
▶ Controller Model
model Input voltage Output voltage Total power aisle Light source interface Maximum power per channel Maximum power per channel Adjustment method Trigger voltage Trigger Delay
HCC-DC5V3W-1T 5VDC 5VDC 3W 1 SM3P female connector 700mA 2.1W Current Regulation / /
HCC-5V7W-2T 100-240VAC 5VDC 7W 2 SM3P female connector 700mA 2.1W Current Regulation 12-24V <1ms
HCC-5V14W-4T 100-240VAC 5VDC 14W 4 SM3P female connector 700mA 2.1W Current Regulation 12-24V <1ms
HCC-5V28W-8T 100-240VAC 5VDC 28W 8 SM3P female connector 700mA 2.1W Current Regulation 12-24V <1ms

▶Similar products

Analog controller

High Power Analog Controller

Digital controller

Flash controller