Automated Sensors
Dual Digital Display Fiber Optic Amplifier | Knob-Type Fiber Optic Amplifier
Dual digital display fiber optic sensor
▶ Product Features
The automatic sensitivity tracking function offers sufficient power, multiple operating modes are available, and the clear digital display provides a concise overview of the operating status. One-button settings ensure ease of use.
▶ Product Specifications
| project | HF-VX8N | HF-VX8P |
|---|---|---|
| Output type | NPN output | PNP output |
| type | One output port, wire lead type | One output port, wire lead type |
| Control output | One output port, equipped with short-circuit protection and automatic interference prevention function. | One output port, equipped with short-circuit protection and automatic interference prevention function. |
| light source | Red, 4-element light-emitting diode | Red, 4-element light-emitting diode |
| reaction time | P0：25μs, P1：50μs, P2：100μs, P3：200μs, P4：800μs | P0：25μs, P1：50μs, P2：100μs, P3：200μs, P4：800μs |
| Output selection | LIGHT-ON / DARK-ON (Button selection) | LIGHT-ON / DARK-ON (Button selection) |
| Display indicator | Operation indicator lights: red LEDs; Dual digital monitors: dual 7-digit display, with the threshold (4-digit green LED indicator) and current value (4-digit red LED indicator) lit together. Current value range: 0-9999 | Operation indicator lights: red LEDs; Dual digital monitors: dual 7-digit display, with the threshold (4-digit green LED indicator) and current value (4-digit red LED indicator) lit together. Current value range: 0-9999 |
| Detection method | Light intensity (can perform area detection and provide automatic sensitivity tracking function) | Light intensity (can perform area detection and provide automatic sensitivity tracking function) |
| Delay function | The options are: disconnect delay timer/enable delay timer/single timer/enable both delay and single timer. The timing display offers selectable durations from 1ms to 9999ms. | The options are: disconnect delay timer/enable delay timer/single timer/enable both delay and single timer. The timing display offers selectable durations from 1ms to 9999ms. |
| Control output | NPN/PNP open-type current collector 24V, maximum 100mA (main component only), maximum 20mA (residual voltage: 1V when extension components are connected). | NPN/PNP open-type current collector 24V, maximum 100mA (main component only), maximum 20mA (residual voltage: 1V when extension components are connected). |
| power supply | 12 to 24VDC ±10%, Float ratio (PP): Maximum 10% Level 2 | 12 to 24VDC ±10%, Float ratio (PP): Maximum 10% Level 2 |
| working environment brightness | Incandescent bulbs: maximum 20,000 lux; Daylight bulbs: maximum 30,000 lux | Incandescent bulbs: maximum 20,000 lux; Daylight bulbs: maximum 30,000 lux |
| Power consumption | Standard mode: Maximum 300mW, Maximum voltage: 24V | Standard mode: Maximum 300mW, Maximum voltage: 24V |
| Vibration resistance | 10 to 55 Hz, dual amplitude: 1.5 mm, X, Y, Z axes are 2 hours each. | 10 to 55 Hz, dual amplitude: 1.5 mm, X, Y, Z axes are 2 hours each. |
| Ambient temperature | -10 to 55°C, no freezing | -10 to 55°C, no freezing |
Knob-type fiber optic amplifier
▶ Product Introduction
It features a simple and easy-to-use single-button design, requires no complicated settings, has sufficient power, provides stable detection, and offers high cost-effectiveness.
▶ Product Specifications
| model | HS-RN1A/RP1A |
|---|---|
| type | Standard cable separate output |
| Output mode | NPN/PNP |
| Control output | NPN open collector 24V, maximum output current 100mA or less, residual voltage 1V or less |
| reaction precision | Action, reset less than 200us |
| Operating mode | Maximum of 5 units |
| power supply voltage | DC12-24V+10%(RippleP-P:10%Max) |
| Consume current | Power consumption below 960mW, current consumption below 40mA |
| Delay function | Switch mode switching (fixed timer duration: 40ms) |
| Connection method | Lead-out of wire |
| Protection circuit | Reverse connection and output short circuit protection |
| Insulation resistance | 20MΩ min.(DC250V) |
| Insulation withstand voltage | AC1000V 60Hz for 60 sec |
| Operating and storage temperatures | -15~ 55℃ (do not allow condensation or freezing), storage: -30~ 70℃ |
| Operating humidity | 35~85%RH |
| Ambient light intensity | Incandescent bulbs, 1000 lux or less; fluorescent bulbs, 2000 lux or less. |
| Vibration resistant | Frequency: 10~55Hz, double amplitude 1.5mm, 120 minutes in each direction |
| Impact resistance | Acceleration 500 m/s²: 3 in each direction |
| Luminous body | Red LED |
| Material | ABS , PMMA |
| weight | 70G |
| appendix | Mounting bracket |
