Automated Sensors
Circular tube photoelectric switch
▶ Product Features
- It has a moderate size and a built-in large sensor. The threaded housing makes installation convenient. It offers multiple options for through-beam and reflective lighting, and is equipped with a clear indicator light. The internal circuitry is highly integrated, resulting in fast response and high reliability!
- Easy to monitor and install
- Unaffected by angle or dust, it offers fast response and high precision.
- Excellent heat resistance, dust and stain resistance
- Multiple distances and output modes are available.
▶ Main Specifications - Blue Plastic Casing
| Light-emitting diode for projection | Visible red light |
|---|---|
| Standard test material | 10x10cm white non-reflective paper |
| Protection circuit | Polarity circuit protection | Short circuit protection | Surge absorption protection |
| Control output | Light-on/Light-off ON knob switch |
| Operating voltage | 10-30VDC (PP) 10% inclusive) |
| Leakage current | <30m |
| Load current | DC 30V below 100mA |
| Response frequency | Both motion and recovery are at 400Hz. |
| Operation indicator light | Red LED |
| Protection level | IEC standard IP64 |
| Ambient temperature | Operating temperature: -25~+70%℃; Storage temperature: -30~+80%℃ (but must not freeze or fog). |
| Ambient humidity | Store at 35-95% RH. |
| Use ambient lighting | Incandescent lamps: Illuminance of the illuminated surface below 5,000 lx; Sunlight: Illuminance of the illuminated surface below 10,000 lx |
| Insulation resistance | Charging section and housing section with a resistance of 20MΩ or higher (DC500V MEGA) |
| Impact resistance | 500m/s (approximately 50g) X, Y, and Z were tested three times consecutively. |
| Vibration resistance | 10-55Hz; 1.5mm X, Y, Z directions for 2 hours |
| Withstand voltage | AC1000V 50/60Hz 1min charging unit and casing |
| Wiring method | Lead wire type: 3C/4.8Φ*2M PUR wire, type C-M12; Connector type: PP, type P-quick connector. |
| Material | PBT reinforced plastic PVC oil-resistant wire |
| Electrical wire standards | Four-core (core wire colors: brown, black, white, blue) |
| wire diameter | 3.8mm |
▶ Product Specifications - Blue Plastic Shell
| kinds | Diffuse reflection type | Diffuse reflection type | Diffuse reflection type | Diffuse reflection type | Reflective lens |
|---|---|---|---|---|---|
| NPN output (normally open and normally closed combined) | VTE18N-10 | VTE18N-40 | VTE18N-1MR | VTE18N-2MR | VTE18N-3MD |
| PNP output (normally open and normally closed integrated) | VTE18P-10 | VTE18P-40 | VTE18P-1MR | VTE18P-2MR | VTE18P-3MD |
| Detection distance | 10cm | 40cm | 1m | 2m | 3m |
▶ Main parameters - Plastic casing
| Light-emitting diode for projection | infrared |
|---|---|
| Standard test material | 10x10cm white non-reflective paper |
| Protection circuit | Polarity circuit protection | Short circuit protection | Surge absorption protection |
| Control output | Light-on/Light-off ON knob switch |
| Operating voltage | 10-30VDC (PP) 10% inclusive) |
| Leakage current | <30m |
| Load current | DC 30V below 100mA |
| Response frequency | Both motion and recovery are at 400Hz. |
| Operation indicator light | Red LED |
| Protection level | IEC standard IP64 |
| Ambient temperature | Operating temperature: -25~+70%℃; Storage temperature: -30~+80%℃ (but must not freeze or fog). |
| Ambient humidity | Store at 35-95% RH. |
| Use ambient lighting | Incandescent lamps: Illuminance of the illuminated surface below 5,000 lx; Sunlight: Illuminance of the illuminated surface below 10,000 lx |
| Insulation resistance | Charging section and housing section with a resistance of 20MΩ or higher (DC500V MEGA) |
| Impact resistance | 500m/s (approximately 50g) X, Y, and Z were tested three times consecutively. |
| Vibration resistance | 10-55Hz; 1.5mm X, Y, Z directions for 2 hours |
| Withstand voltage | AC1000V 50/60Hz 1min charging unit and casing |
| Wiring method | Lead wire type: 3C/4.8Φ*2M PUR wire, type C-M12; Connector type: PP, type P-quick connector. |
| Material | PBT reinforced plastic PVC oil-resistant wire |
| weight | Lead wire type: g M12 connector type: g Quick connector type: g |
| Electrical wire standards | Three-core (core wire colors: brown, black, blue) |
| wire diameter | 4.8mm |
▶ Product Specifications - Plastic Shell
| kinds | Diffuse reflection type | Diffuse reflection type | Diffuse reflection type | Diffuse reflection type | Diffuse reflection type |
|---|---|---|---|---|---|
| NPN output (normally open) | UX-10R-N1 | UX-30R-N1 | UX-40R-N1 | UX-50R-N1 | UX-80R-N1 |
| NPN output (normally closed) | UX-10R-N2 | UX-30R-N2 | UX-40R-N2 | UX-50R-N2 | UX-80R-N2 |
| PNP output (normally open) | UX-10R-P1 | UX-30R-P1 | UX-40R-P1 | UX-50R-P1 | UX-80R-P1 |
| PNP output (normally closed) | UX-10R-P2 | UX-30R-P2 | UX-40R-P2 | UX-50R-P2 | UX-80R-P2 |
| Detection distance | 10cm | 30cm | 40cm | 50cm | 80cm |
▶ Main parameters - Metal casing
| Light-emitting diode for projection | infrared |
|---|---|
| Standard test material | 10x10cm white non-reflective paper |
| Protection circuit | Polarity circuit protection | Short circuit protection | Surge absorption protection |
| Control output | Light-on/Light-off ON knob switch |
| Operating voltage | 10-30VDC (PP) 10% inclusive) |
| Leakage current | <30m |
| Load current | DC 30V below 100mA |
| Response frequency | Both motion and recovery are at 400Hz. |
| Operation indicator light | Red LED |
| Protection level | IEC standard IP64 |
| Ambient temperature | Operating temperature: -25~+70%℃; Storage temperature: -30~+80%℃ (but must not freeze or fog). |
| Ambient humidity | Store at 35-95% RH. |
| Use ambient lighting | Incandescent lamps: Illuminance of the illuminated surface below 5,000 lx; Sunlight: Illuminance of the illuminated surface below 10,000 lx |
| Insulation resistance | Charging section and housing section with a resistance of 20MΩ or higher (DC500V MEGA) |
| Impact resistance | 500m/s (approximately 50g) X, Y, and Z were tested three times consecutively. |
| Vibration resistance | 10-55Hz; 1.5mm X, Y, Z directions for 2 hours |
| Withstand voltage | AC1000V 50/60Hz 1min charging unit and casing |
| Wiring method | Lead wire type: 3C/4.8Φ*2M PUR wire, type C-M12; Connector type: PP, type P-quick connector. |
| Material | Brass chrome-plated PVC oil-resistant wire |
| Electrical wire standards | Three-core (core wire colors: brown, black, blue) |
| wire diameter | 4.8mm |
▶ Product Specifications - Metal Casing Diffuse Reflection Type
| kinds | Diffuse reflection type | Diffuse reflection type | Diffuse reflection type | Diffuse reflection type | Diffuse reflection type |
|---|---|---|---|---|---|
| NPN output (normally open) | TX-10R-N1 | TX-40R-N1 | TX-50R-N1 | TX-80R-N1 | TX-100R-N1 |
| NPN output (normally closed) | TX-10R-N2 | TX-40R-N2 | TX-50R-N2 | TX-80R-N2 | TX-100R-N2 |
| PNP output (normally open) | TX-10R-P1 | TX-40R-P1 | TX-50R-P1 | TX-80R-P1 | TX-100R-P1 |
| PNP output (normally closed) | TX-10R-P2 | TX-40R-P2 | TX-50R-P2 | TX-80R-P2 | TX-100R-P2 |
| Detection distance | 10cm | 40cm | 50cm | 80cm | 100cm |
▶ Product Specifications - High Temperature Resistant Metal Casing/Through-beam Type
| kinds | High temperature resistant type | Through-beam type |
|---|---|---|
| NPN output | TX-40R-N1-GW (Normally Closed) | TX-20T-N1 (Normal Open) |
| NPN output | TX-40R-N2-GW (Normally Closed) | TX-20T-N2 (Normally Closed) |
| PNP output | TX-40R-P1-GW (Normal Open) | TX-20T-P1 (Normal Open) |
| PNP output | TX-40R-P2-GW (Normally Closed) | TX-20T-P2 (Normally Closed) |
| Detection distance | 40cm | 20m |
